I have a 64 Daytona project I have lost interest in, I would like to offer it up to someone willing to take this project on. I have a large collection of parts, I’ve refurbished or rebuilt most of the chassis and drivetrain parts. It needs someone to weld in floors and do some a-pillar repairs. I have 2 rust free a-pillars cut from a donor car [may not be needed] the trunk pan and rear body panel is tacked in place, needs finishing.
NOS parts: fenders, all front apron parts, front air panel, quarter panels, rear body panels, grille, headlight bezels, tail light chrome trim, assorted moldings and misc parts.
Classic Industries floors, trunk, floor and trunk supports
High performance parts: all original R1 parts, including a strong running internally modified R1 engine [r2+ cam, roller rockers 1.6 ratio, Chevy valve conversion, comp Cam beehive valve springs]
R3 headers, aluminum flywheel, Hays clutch, Mallory distributor [never used] original Prestolite distributor w/Mopar elect. Extra set of Harlan Sharpe roller rockers 1.5 ratio, extra set of Chevy size valves, Don Simmons stainless exhaust, custom roller cam [never used] custom adjustable timing set with custom cover [never used] Jeff Rice Edelbrock Air Gap intake, Edelbrock 500 carb, aluminum valve covers, cool looking cast aluminum intake scoop, and probably more stuff i can’t remember.
Suspension: HD front springs, rebuilt rear springs w/extra leaf, gas shocks, over sized front sway bar, stock R1 rear sway bar, adjustable rear traction bars, original traction bars [stored in boxes] Turner disc brakes [original disc brakes stored in boxes] Fast steering arms, Vintage set of ET aluminum slots w/ BF Goodrich T/As, aftermarket brake booster and master cylinder [originals stored in boxes]
Interior: 2 good dash pads 1-blue 1-black, 2 sets of seats 1-64 blue [poor] 1-66 black [driver] complete set of very good 64 blue interior trim panels, complete set of original 64 R1 guages with 160 speedo and non-working tach.
Glass: 2 complete sets, 1-tinted 1-clear, 2 sets of regulators, 1-set refurbished
The original car was a 1964 Daytona Hardtop R1, Strato Blue, Power Shift, P/S, tinted windows, 3:55 TT, highly optioned, but “non-package” car. Only option missing to be “full Package” was HD springs, i believe. Vin# 64V-11353 one of 73 R1 Daytona Hardtops. Very late production [october i think]
There is also a 1964 Canadian Daytona hardtop parts car included, this car was used as the “mule” parts were rebuilt and installed on this car and it was driven as a fun driver for a few years. Chassis and drivetrain are on this car, it cannot be driven but it does run.
I will not split this collection up, This rare fun car needs to be re-assembled and enjoyed, I would like to get $7500 for everything I have, and there’s a lot of stuff! I am open to reasonable offers.
Located in wester Ct.
1964 Daytona R1 hardtop project car
Forum rules
Please include your contact information as non-members will not be able to contact you. Non-members can submit items via email to webmaster.
Please include your contact information as non-members will not be able to contact you. Non-members can submit items via email to webmaster.
-
steve c.
- 20 - 59 Posts
- Posts: 36
- Joined: 22 Mar 2007, 19:36
- Location: new milford, ct.
1964 Daytona R1 hardtop project car
daytona r1
-
steve c.
- 20 - 59 Posts
- Posts: 36
- Joined: 22 Mar 2007, 19:36
- Location: new milford, ct.
Re: 1964 Daytona R1 hardtop project car
You do not have the required permissions to view the files attached to this post.
daytona r1